IP Routing 3 Flashcards Preview

CCNA > IP Routing 3 > Flashcards

Flashcards in IP Routing 3 Deck (8)
Loading flashcards...
1

Question 1
Which two statements about floating static routes are true? (Choose two)
A. They are routes to the exact /32 destination address
B. They are used when a route to the destination network is missing
C. They have a higher administrative distance than the default static route administrative distance
D. They are used as back-up routes when the primary route goes down
E. They are dynamic routes that are learned from a server

Answer: C D

2

Question 2
Which definition of a host route is true?
A. A route that is manually configured
B. A route used when a destination route is missing
C. A route to the exact /32 destination address
D. Dynamic route learned from the server

Answer: C

3

Question 3
When troubleshooting Ethernet connectivity issues, how can you verify that an IP address is known to a router?
A. Check whether the IP address is in the routing table
B. Check whether an ACL is blocking the IP address
C. Check whether the IP address is in the CAM table
D. Check whether the IP address is in the ARP table

Answer: D

4

Question 4
If Computer A is sending traffic to computer B, which option is the source IP address when a packet leaves R1 on interface F0/1?
A. IP address of the R2 interface F0/1
B. IP address of computer B
C. IP address of R1 interface F0/1
D. IP address of Computer A

Answer: D

5

Question 5
When is a routing table entry identified as directly connected?
A. When the local router is in use as the network default gateway
B. When the network resides on a remote router that is physically connected to the local router
C. When an interface on the router is configure with an ip address and enabled
D. When the route is statically assigned to reach a specific network

Answer: C

6

Question 6
Router R1 has a static router that is configured to a destination network. A directly connected inference is configured with an IP address in the same destination network. Which statement about R1 is true?
A. It refuses to advertise the dynamic route to other neighbors
B. It sends a withdrawal signal to the neighboring router
C. It disables the routing protocol
D. It prefers the static route

Answer: D

7

Question 7
Router R1 has a static route that is configured to destination network.A directly connected interface is configured with an IP address in the same destination network. Which statement about R1 is true?
A. R1 refuses to advertise the dynamic route to other neighbors
B. R1 prefers the static route
C. R1 prefers the directly connected interface
D. R1 sends a withdrawal notification to the neighboring router

Answer: C

8

Question 8
In which situation would the use of a static route be appropriate?
A. To configure a route to the first Layer 3 device on the network segment.
B. To configure a route from an ISP router into a corporate network.
C. To configure a route when the administrative distance of the current routing protocol is too low.
D. To reach a network is more than 15 hops away.
E. To provide access to the Internet for enterprise hosts

Answer: E