(a) a load factor demand with no protection
(b) a direct sidestick to elevator relationship
(c) a direct sidestick to elevator relationship with automatic pitch trim
(d) achieved through the THS using manual pitch trim control
(b) a direct sidestick to elevator relationship
(a) if blue hydraulic system has failed
(b) if green and yellow hydraulic systems have failed
(c) it is always available manually
(d) after loss of Flight Augmentation Computer (FAC) 1 and 2
(b) if green and yellow hydraulic systems have failed
(a) 67 deg
(b) 33 deg
(c) 45 deg
(d) 90 deg
(b) 33 deg
(a) all spoilers
(b) spoilers 1 to 3
(c) spoilers 2,3,4
(d) spoilers 1 to 4
(a) all spoilers
(a) yaw damping
(b) rudder trim and yaw damping
(c) turn co-ordination
(d) rudder trim only
(d) rudder trim only
(a) pitch control is automatically transferred to SEC 1 or SEC 2
(b) pitch control is automatically transferred to SEC 1 or SEC 3
(c) pitch control is automatically transferred to SEC 3
(d) pitch control is automatically transferred to ELAC 3
(a) pitch control is automatically transferred to SEC 1 or SEC 2
(a) the rudder can still be controlled by the rudder pedals
(b) rudder control is lost
(c) rudder control is provided by SEC 3
(d) rudder control is provided by FMGC 1
(a) the rudder can still be controlled by the rudder pedals
(a) control surface movement is proportional to the algebraic sum of the deflections of both sticks
(a) mechanically controlled and hydraulically actuated
(b) hydraulically controlled and electrically actuated
(c) electrically controlled and electrically actuated
(d) electrically controlled and hydraulically actuated
(d) electrically controlled and hydraulically actuated
(a) electrical
(b) mechanical
(c) hydraulic
(d) pneumatic
(a) electrical
(a) Ground spoiler function: all spoilers deploy
(b) Speedbrake function: spoilers 1,2 and 3 deploy
(c) Roll function: ailerons and spoilers 4 & 5 deploy
(d) Speedbrake function: all spoilers deploy
(a) Ground spoiler function: all spoilers deploy
(a) 2 - active and damping
(b) 3 - active, damping and centering
(c) 1 - active
(d) 3 - active, standby and damping
(b) 3 - active, damping and centering
(a) +2.5g and -1g in all configurations
(b) +2.0g and 0g in all configurations
(c) +2.5g and -1g : limits apply only in clean configuration
(d) +2.5g and -1g clean; +2.0g and 0g in other configurations
(d) +2.5g and -1g clean; +2.0g and 0g in other configurations
(a) ELAC 1
(b) ELAC 2
(c) SEC 1
(d) SEC 2
(b) ELAC 2
(a) 2
(b) 0
(c) 1
(d) 3
(a) 2
(a) one of two electric motors for auto trim
(b) an electrical trim wheel
(c) one of two electric motors
(d) one of three electric motors for auto trim and a mechanical trim wheel 1
(d) one of three electric motors for auto trim and a mechanical trim wheel 1
(a) when the aircraft passes 50’ RA
(b) passing 30’ RA
(c) passing 50’ RA
(d) passing 350’ RA
(a) when the aircraft passes 50’ RA
(a) the pitch attitude is memorised
(b) the attitude is set as an initial reference for pitch attitude control
(c) the pitch attitude is reduced to 2° nose down over 8 seconds
(d) the pitch attitude is increased by 2°
(c) the pitch attitude is reduced to 2° nose down over 8 seconds
(a) by momentarily pressing the takeover PB on the active stick
(b) by simultaneously pressing the takeover PB on both sticks
(c) by momentarily pressing the takeover PB on the deactivated stick
(d) by momentarily pressing the takeover PB on either stick
(d) by momentarily pressing the takeover PB on either stick
(a) roll attitude constant when stick is neutral, up to 45° bank
(b) maximum bank angle of 45°, provided no other protections are active
(c) maximum bank angle of 45° with full lateral sidestick deflection
(d) roll attitude constant when stick is neutral, up to 33° bank
(d) roll attitude constant when stick is neutral, up to 33° bank
(a) ailerons, spoilers 2-5 and rudder in the sidestick
(b) ailerons and all spoilers in the sidestick
(c) ailerons and speedbrakes in the sidestick
(d) ailerons and spoilers 2 & 4 in the sidestick
(a) ailerons, spoilers 2-5 and rudder in the sidestick
(a) ailerons only through the SECs
(b) ailerons and spoilers 2-5 through the SECs
(c) spoilers 2 4 only
(d) spoilers 2-5 through the SECs
(d) spoilers 2-5 through the SECs
(a) it cannot be released and the corresponding surface cannot be operated
(a) slat and flap operation remains normal
(b) flaps and slats operate at half speed
(c) flaps are lost
(d) slats are lost
(b) flaps and slats operate at half speed