Purifying and Organic liquid Flashcards Preview

Chemistry 6 - Organic Chemistry > Purifying and Organic liquid > Flashcards

Flashcards in Purifying and Organic liquid Deck (31)
1

what could a desired product from a reaction be contaminated with

- unreacted starting materials
- other organic products
- the inorganic reagents used or formed
- water

2

what type of product do we need to know the separation techniques of

organic liquids

3

what are the four techniques we need to know of

- simple distillation
- fractional distillation
- solvent extraction
- drying

4

what is a problem that comes with handling organic compounds in experiments and separations

- they are flammable and sometimes toxic
- they also attack corks and bungs which increases the risk of leaks and contamination

5

what is done to prevent those things from happening

- use a type of apparatus made mainly from glass
- which can be fitted together tightly using ground-glass joints

6

what are better options in terms of safety than a bunsen burner when wanting to heat something in these experiments

heating mantle, hot water bath or hot oil bath

7

what does simple distillation simply involve

heating something in a flask connected to a condenser

8

how does simple distillation work

- the liquid with the lowest boiling temperature evaporates or boils off first
- it then passes into the condenser first
- this means that it can be collected in the receiver separately from any other liquid that evaporates later

9

why do you place a thermometer in the set-up right above the reaction mixture

- to monitor the temperature of the vapour as it passes into the condenser
- if the temp remains steady it indicates that one compound is distilling over
- if the temp begins to rise it indicates that a different compounds is distilling over

10

what are the advantages of using simple distillation over fractional distillation

it is easier to set up and is quicker to do

11

what is a disadvantage of simple distillation

it doesnt separate the liquids as well as fractional distillation

12

when should simple distillation be used

- when the boiling temp of the liquid being purified is very different from the other liquids in the mixture
- ideally a difference of 25C

13

what is the only difference between how fractional distillation is set up from simple distillation

there is a fractionating column between the heating flask and the still head

14

what is the column usually filled with and why

- glass beads or pieces of broken glass
- because it acts as a surface in which the vapour can condense
- theen be evaporated again as hot vapour passes up

15

what is the reason why fractional distillation separates the liquids out more effectively

- the vapour should undergo several repeated distillations as it passes up the column
- which would provide a better separation

16

when should fractional distillation be used

- when the difference in the boiling temperatures between the substances in the mixture is small
- and when there are several compounds to be separated from a mixture

17

what does solvent extraction involve`

using a solvent to remove the desired product from the other substances in the reaction mixture

18

what two requirements does the solvent need to meet

- it should be immiscible (not mix) with the solvent containing the desired product
- the desired product should be much more soluble in the solvent than in the reaction mixture

19

what is the process of solvent extraction

- place the reaction mixture in a separating funnel and then add the chosen solvent (it should from a separate layer)
- place the stopper in the neck of the funnel and gently shake the contents of the funnel for a while
- allow the contents to settle into two layers
- remove the stopper and open the tap to allow the lower layer to drain into a flask
- pour the upper layer into a separate flask

20

why is it better to add the solvent small portions rather than in a single large volume

- because it is more efficient
- as using more portions of solvent with the same total volume removes more of the desired product

21

what then needs to be done in order to get the desired organic product on its own as it is now mixed with the solvent

simple distillation or fractional distillation needs to be used to separate them

22

why is drying a separation technique in the first place

- a liquid organic product may partially or completely dissolve in water
- so water might be an impurity that needs to be removed by a drying agent

23

what feature does the drying agent need to have

that it doesnt react with the organic liquid

24

how is drying done

- the drying agent is added to the organic liquid and the mixture is swirled or shaken ten left for a bit
- before use the agent is powdery but after it looks more crystalline
- if a bit more is added and it remains powdery it indicates that the liquid is dry
- the drying agent is removed either by decantation or by filtration

25

what is decantation

pouring the organic liquids off the solid drying agent

26

what is the easiest way to test whether a liquid is pure

- measure its boiling temperature
- as impurities raise its boiling temp

27

how would you practically do this with a liquid organic compound

- you would measure its temperature
- and compare it to the carefully measured boiling temps of the same compound that are online or in data books
- you can then make a decision about how pure it is

28

why is using a thermometer quite inaccurate when it comes to measuring boiling temps and determining whether something is pure

- the thermometer might read too high or low
- so even if your measured temp exactly matches the one on the data book or online, you may wrongly assume that your compound is pure

29

what is another thing that you need to be aware of when doing this

that some organic compounds have the same boiling temp

30

What are drying agents usually

- anhydrous metal salts
- like calcium sulfate

31

Why do do drying agents work

- they form hydrated salts when they come into contact with water
- so when they come into contact with water in an organic liquid they absorb the water as water of crystallisation