Flashcards in VLAN Deck (10)
What are three benefits of implementing VLANs? (Choose three)
A. A more efficient use of bandwidth can be achieved allowing many physical groups to use the same network infrastructure.
B. A higher level of network security can be reached by separating sensitive data traffic from other
C. Broadcast storms can be mitigated by increasing the number of broadcast domains, thus reducing their size.
D. A more efficient use of bandwidth can be achieved allowing many logical networks to use the same network infrastructure.
E. Port-based VLANs increase switch-port use efficiency, thanks to 802.1 Q trunks.
F. VLANs make it easier for IT staff to configure new logical groups, because the VLANs all belong to the same broadcast domain. Broadcast storms can be mitigated by decreasing the number of broadcast domains, thus increasing their size.
Answer: B C D
Which command can you enter to view the ports that are assigned to VLAN 20?
A. Switch#show ip interface brief
B. Switch#show interface vlan 20
C. Switch#show ip interface vlan 20
D. Switch#show vlan id 20
What are three advantages of VLANs? (Choose three)
A. They allow access to network services based on department, not physical location.
B. They provide a method of conserving IP addresses in large networks.
C. They utilize packet filtering to enhance network security.
D. They can simplify adding, moving, or changing hosts on the network.
E. They provide a low-latency internetworking alternative to routed networks.
F. They establish broadcast domains in switched networks.
Answer: A D F
Which command sequence can you enter to create VLAN 20 and assign it to an interface on a switch?
A. Switch(config)#vlan 20
Switch(config)#interface gig x/y
Switch(config-if)#switchport access vlan 20
B. Switch(config)#interface gig x/y
Switch(config-vlan)#switchport access vlan 20
C. Switch(config)#vlan 20 S
witch(config)#interface vlan 20
Switch(config-if)#switchport trunk native vlan 20
D. Switch(config)#vlan 20
Switch(config)#interface vlan 20
Switch(config-if)#switchport access vlan 20 E. Switch(config)#vlan 20
Switch(config)#interface vlan 20
Switch(config-if)#switchport trunk allowed vlan 20
Which two circumstances can cause collision domain issues on VLAN domain? (Choose two)
A. duplex mismatches on Ethernet segments in the same VLAN
B. multiple errors on switchport interfaces
C. congestion on the switch inband path
D. a failing NIC in an end device
E. an overloaded shared segment
Answer: A C
What is the default VLAN on an access port?
Which statement about native VLAN traffic is true?
A. Cisco Discovery Protocol traffic travels on the native VLAN by default
B. Traffic on the native VLAN is tagged with 1 by default
C. Control plane traffic is blocked on the native VLAN.
D. The native VLAN is typically disabled for security reasons
Refer to the exhibit. Which statement describes the effect of this configuration?
Router#configure terminal Router(config)#vlan 10 Router(config-vlan)#do show vlan
A. The VLAN 10 VTP configuration is displayed.
B. VLAN 10 spanning-tree output is displayed.
C. The VLAN 10 configuration is saved when the router exits VLAN configuration mode.
D. VLAN 10 is added to the VLAN database.
Which method does a connected trunk port use to tag VLAN traffic?
A. IEEE 802.1w
B. IEEE 802.1D
C. IEEE 802.1Q
D. IEEE 802.1p