VTP Flashcards Preview

CCNA > VTP > Flashcards

Flashcards in VTP Deck (7)
Loading flashcards...
1

Question 1
Which protocol supports sharing the VLAN configuration between two or more switches?
A. multicast
B. STP
C. VTP
D. split-horizon

Answer: C

2

Question 2
How to enable VLANs automatically across multiple switches?
A. Configure VLAN
B. Confiture NTP
C. Configure each VLAN
D. Configure VTP

Answer: D

3

Question 3
Which VTP mode can not make a change to vlan?
A. Server
B. Client
C. Transparent
D. Off

Answer: B

4

Question 4
Which DTP switch port mode allows the port to create a trunk link if the neighboring port is in trunk mode, or desirable auto mode?
A. Dynamic auto
B. Trunk
C. Dynamic desirable
D. Access

Answer: A

5

Question 5
To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met? (Choose two)
A. Each end of the trunk line must be set to IEEE 802.1E encapsulation.
B. The VTP management domain name of both switches must be set the same.
C. All ports on both the switches must be set as access ports.
D. One of the two switches must be configured as a VTP server.
E. A rollover cable is required to connect the two switches together.
F. A router must be used to forward VTP traffic between VLANs.

Answer: B D

6

Question 6
What are the requirements for running VTP? (Choose two)
A. VTP domain names must be different
B. VTP domain names must be the same
C. VTP server must have the highest revision numbers
D. All devices need to have the same VTP version

Answer: B D

7

QUESTION 122

What are two characteristics of a switch that is configured as a VTP client? (Choose two.)

A. If a switch that is configured to operate in client mode cannot access a VTP server, then the switch reverts to transparent mode.

B. On switches that are configured to operate in client mode, VLANs can be created, deleted, or renamed locally.

C. The local VLAN configuration is updated only when an update that has a higher configuration revision number is received

D. VTP advertisements are not forwarded to neighboring switches that are configured in VTP transparent mode.

E. VTP client is the default VTP mode.

F. When switches in VTP client mode are rebooted, they send a VTP advertisement request to the VTP servers.

Hide Answer
Correct Answer: CF
Hide Explanation

Explanation: VLAN Trunking Protocol (VTP) http://archive.networknewz.com/2004/0317.html VTP Modes Server Mode Once VTP is configured on a Cisco switch, the default mode used is Server Mode. In any given VTP management domain, at least one switch must be in Server Mode. When in Server Mode, a switch can be used to add, delete, and modify VLANs, and this information will be passed to all other switches in the VTP management domain. Client Mode When a switch is configured to use VTP Client Mode, it is simply the recipient of any VLANs added, deleted, or modified by a switch in Server Mode within the same management domain. A switch in VTP client mode cannot make any changes to VLAN information. Transparent Mode A switch in VTP Transparent Mode will pass VTP updates received by switches in Server Mode to other switches in the VTP management domain, but will not actually process the contents of these messages. When individual VLANs are added, deleted, or modified on a switch running in transparent mode, the changes are local to that particular switch only, and are not passed to other switches in the VTP management domain.